To read news specific to Big Blue Tech - Click Here




Posts Tagged ‘diver training’






Extended Range Diving in Thailand

Tuesday, March 16th, 2010

Technical diver training completed in the Gulf of Thailand

technical-extended-range-15-292x300 Extended Range Diving in Thailand

Koh Tao, Thailand -

Big Blue Tech celebrates the graduation of Magnus Baer form a TDI Extended Range course after completing his final 4 training dives on our wreck the “Big Blue Wreck” which is a sunken ferry discovered earlier this month.

Over the last 4 training dives we cleaned up the wreck removing obstacles and fishing nets to make it more attractive and safer for divers to penetrate and enjoy in the future. Not only were the tasks challenging it was also a great chance for Magnus to experience working underwater and keeping track of his environment and responsibility as the dive progressed.

The TDI Extended Range course is the pinnacle of deep air diving where the technical diver learns to explore to a depth of 55m using mixes of oxygen to handle the decompression stops.

Certain areas of the world provide spectacular dives at depths deeper than 39m/130 feet but you will not have access (or very limited access) to helium. The TDI Extended Range course teaches you the proper techniques for utilizing compressed air as a breathing gas and with a maximum depth of 55m/180 feet you won’t have to miss those dives. The Extended Range course will cover topics and skills such as

  • Equipment requirements and configuration
  • Decompression options
  • Use of surface marker buoys
  • Buddy rescue
  • Narcosis checks and management

Although this is the end of the course it’s not the end of his diving and will continue to join us on trips and expeditions in the future to gain valuable experience as a certified technical diver which is essential after certification.


Koh Tao Buoyancy World

Thursday, March 4th, 2010

Technical divers explore underwater sculptures on Koh Tao

koh-tao-buoyancy-world-18-300x225 Koh Tao Buoyancy World

Koh Tao, Thailand - During technical diver training for Magnus Baer the training team explored a new feature on Koh Tao called ‘Buoyancy World’ which is a island wide initiative created with the support for Marine Conservation Koh Tao

Buoyancy world is an alternative dive site and coral nursery designed and constructed by the island’s community and dive schools through the Save Koh Tao group. This island wide project is part of a larger program being enacted by the Save Koh Tao Marine Branch in order to monitor and protect our local resources and ecosystems.

Through this project a new dive site has been constructed which is specially designed to function as a buoyancy training site and coral/fish nursery. By increasing novice diver’s buoyancy skills with obstacles not found naturally on a reef we hope to reduce incidences of personal injury/illness and protect natural reef areas from damage. By also acting as a coral/fish nursery the project will help to restore and improve the abundance and biodiversity of Koh Tao’s reefs and help to offset local anthropogenic impacts. Additionally, this project will further increase awareness and community involvement on environmental conservation projects and improve tourist perceptions of Koh Tao.

The general plan of the site is various features built separately and then set up in close proximity to form one cohesive site. Features include:

  • Training Aids
    • Swim-throughs or caves
    • Rings, hoops, and other obstacles
    • Balance beams
    • Hover weights
    • Permanent CESA Lines
    • Navigation check points
    • Search and recovery objects
    • Ecological Monitoring Program/Reef Check Belt Transects
  • Coral Nursery Platforms/anchoring points
  • Art & Sculptures
  • Fish Nurseries/aggregates
  • Diverse habitats for Marine Organisms

On this day we used the features of Buoyancy World to help improve the trim and underwater control for Magnus who started his first skills in technical diving gear. These skills will be enhanced with more training leading up to his certification dives tomorrow for the TDI Intro to Tech course.


Introduction to Tec Diving in Thailand

Wednesday, March 3rd, 2010

Technical diver training begins on Koh Tao

tec-thailand-11-300x225 Introduction to Tec Diving in Thailand

Koh Tao, Thailand – Today Big Blue Tech starts a tec course for Magnus Baer who comes from season and has been travelling for the past 4 months on a round the world trip.

Magnus has been to Koh Tao before working on the Island as a diving instructor so this would be a familiar setting for him t o learn more challenging diving.

Magnus’ tech diving course will include the ‘Intro To Tech’ , ‘Advanced Nitrox’ , ‘Decompression Procedures’ and ‘Extended Range’ modules from TDI (Technical Diving International) which is the leading and most recognized technical diving certification agency in the world. TDI’s motto of ‘We lead, Others Follow’ is indicative of their and our style of technical diving.

While Magnus joined us for specifically TDI training it was the small touches provided by Big Blue Tech which made the difference. The equipment provided for use during the course is staggering and top of the line.

Magnus was issued the following equipment today for use for the duration of his course.
-    Boots, OMS Slipstream Fins, 3mm Wetsuit
-    OMS 60lbs Double Bladder Wing with Aluminium Back plate and Comfort Harness
-    Oms Thigh Pocket, 2 lift bags, OMS Cavern Reel, Finger Reel
-    Titanium Knife, Wrist Slate, Primary and Secondary Torch
-    Backup and Primary Mask
-    Uwatec Bottom Timer and Depth Gauge
-    Suunto Vytec Ds, Compass
-    Apeks XTX 20 back gas regulators
-    Scubapro decompression regulators
-    Personal O2 tank, personal twinset, personal lean mix tank and hardware
-    OMS deco clip hardware and rigging

This is the standard equipment issued to all our students and fun divers. The choice to use this equipment has been based on years to testing other types to fail.

In addition to equipment, Magnus was taken through a refresher of his dive theory including basic physics and physiology to help bring him up to speed with the coming theoretic knowledge needed to succeed on this course.

At lunch Magnus was also taken out by James, Ash and Andy from the team for his 800m swim test which was completed under the required time of 10 minutes.

Tomorrow would be the start of the shallow water skills with his Intro to Tech course which focuses on buoyancy, trim and water control, which is a required foundation for all future technical diving.


Technical Diving Library and Resources

Thursday, November 12th, 2009

TDI Resources (Technical Diving International)

Liability and Release Form

Medical Form

Physician Form

Semi Closed Rebreather Diver

Solo Diver

Air Dilluent CCR Diver

Mixed Gas CCR Diver

Advanced Mixed Gas CCR Diver

Cavern Diver

Intro to Cave Diver

Full Cave Diver

Gas Blender

Advanced Gas Blender

Oxygen Service Technician

Nitrox Diver

Advanced Wreck Diver

Nitrox Diver

Intro to Tech

Advanced Nitrox Diver

Decompression Procedures

Extended Range

Trimix Diver

Advanced Trimix Diver

CMAS Resources (Confédération Mondiale des Activités Subaquatiques)

3 Srar Diver

2 Star Diver

1 Star Diver

Rescue Diver

Children and Youth Diving

Mixed Gas Diver

Normoxic Trimix Diver

Overhead Scooter Diver

Closed Circuit Rebreather Diver

Semi Closed Rebreather Diver

Standards and Procedures

Unerwater Navigation

Trimix Diver

Training and Diving

Underwater Scooter

Cave Diver

Gas Blender and Service Technician

Extended Range Diver

Scientific Diver

PADI Resources (Professional Association of Diving Instructors)

Gas Blender Release

Blender Fill Log

RSTC Medical

Liability Form

Release Form

Release for Nitrox Diving

BSAC Resources (British Sub Aqua Club)

Combined Nitrox Diver

Gas Blender

Advanced Nitrox Diver

Sport Mixed Gas Diver

Extended Range Diver

Advanced Mixed Gas

IANTD Resources (International Association of Nitrox and Technical Divers)

Normoxic Trimix

Technical Diver

Trimix CCR

Gas Blender

Air CCR

Liability Form

Advanced Nitrox

Technical Cave

Nitrox Diver

Release Form

Military Diving Resources

U.S Navy Diving Manual

Contaminated Water Diving Manual

User Operation Manuals

ISC APECS Operation Manual

VR3 Quick Reference Manual

US DIVERS Service and Cleaning Manual

AP Inspiration “Vision” Closed Circuit Rebreather Operation Manual

Sentinel Closed Circuit Rebreather Operation Manual

Sofnolime Reference Guide

Azimuth Closed circuit Rebreather Operation Manual

AP Inspiration “Classic” Closed Circuit Rebreather Operation Manual

Drager “Dolphin” Semi Closed Rebreather Manual

Azimuth Closed Circuit Rebreather Brochure

Drager “Ray” Semi Closed Rebreather Manual

Ap Evolution Operation Manual

Ap Inspiration Operation Manual

Nexus Quick Reference Manual

Suunto D6 Owner Manual

Nexus Closed Circuit Rebreather Operation Manual

Reference Material

Reduced Gradient Bubble Model

Deep Diver Workbook

Physics, Physiology, And Medicine Of Diving

Occupational Diving Cometance

Understanding M-Values

Learners guide to CCR

Texas University Diving Saftey

Confessions of a Mortal Diver

Oxygen Toxicity Calculations

Understanding Deep Stops

Understanding Setpoints For CCR

Cave Divers Are Mortal

Rebreather Blunders And Malfunctions

Boom Scenario

Basic Equipment For Cave Diving

Diving Terms and Explanations

Dive Profile Safety

Diving The Hms Repulse

Diving Incident Report Form

So You Want to Technical Dive

Predive Checklist

In Water Recompression

Depth and Gas

Book Reviews

Rebreather Fundamentals

Dive Medic Resource Manual


Halcyon new Infinity BC System

Monday, October 19th, 2009

*Coming to Big Blue Tech in November 2009

infinity09-190x300 Halcyon new Infinity BC System
The most exciting thing to happen with BCs since the invention of the Scuba tank.
Halcyon Manufacturing is proud to announce our newest BC model, the Infinity ™. The Infinity’s most distinguishing feature is the novel harness adjustment known as the Cinch™. Our quick-adjust Harness (patent pending) redefines what it means to dive a backplate, providing unparalleled comfort and stability in a system with infinite adjustability. Unlike other designs the Cinch™ adjustment eliminates all quick release buckles and dangling webbing. This industry-first innovation marries the stability and streamlining of a backplate with the comfort and flexibility of a recreational jacket BC.
Key Features

  • Infinite adjustability in the blink of an eye
  • Snug, stable fit with easy removal
  • Easily adjustable while in or out of the water
  • Quick, easy fit is ideal for diver training
  • Useful for managing stressed or unconscious divers
  • Easily convertible for suits of varying thickness
  • Seamless use of weight pockets, canister light, hip D-ring
  • Includes Quick-adjust Crotch Strap
  • Deluxe shoulder/backplate pads for unparalleled comfort
  • Backplate pad contains pocket for lift devices
  • Comes standard with ACB10 Weight Pockets
  • Cinch adjustment can be used with singles or doubles

The difference between this and their other BCs is profound; there is a new adjustable harness which allows you to pull tight your harness. This lets you go between a wetsuit and drysuit without having to adjust those pesky belt slides. We got one as a demo in the shop recently, and we are very impressed with it. The cinch is tight enough that it won’t accidentally loose slack, but tightens with a quick pull. They’ve also created an adjustable crotch strap that can be lengthened or shortened in a pull. The harness has two other features worth mentioning; the left D-ring is on a fixed piece of webbing so it will stay stationary as you tighten the harness, and there is a buckle on the right side that serves to hold your canister light.

The new chinch harness is available in several configurations: you can buy the entire package with wing and backplate for 35,000 thb, just the harness pads for 4500 thb, just the cinch adjustment harness to upgrade your current system for $5000, or just the adjustable crotch strap for 2000 thb.

We are offering these online now as a pre-order. Halcyon has told us they expect to ship the first week of November, and we’ll ship pre-orders on a first come, first serve basis.


Event - BSAC Instructor Crossover October

Saturday, October 10th, 2009

bsac-technical-logo Event - BSAC Instructor Crossover October

BSAC Instructor Crossover Course
Why would you want to teach BSAC?

1: Commercial Advantage

BSAC is unique.

Historically BSAC was based on a branch system. Unlike other diver certification agencies, BSAC members enter a local community of divers. This means BSAC members are more active divers, and have greater allegiance towards other BSAC Branches and Dive Centres.

There are large numbers of active BSAC Members in the UK, Middle East, Japan, Korea and Thailand. By becoming a BSAC professional you’ll have unrestricted access to market your training and trips to these tens of thousands of BSAC Members, through channels not available to non-BSAC schools.

BSAC Training is the choice of the UK Armed forces, plus universities in the UK and Thailand. By becoming a BSAC professional you’ll have access to large markets not available to non-BSAC schools.

2. Quality Training and Breadth of Experience

Many hundreds of thousands of divers have trained with the BSAC over more than 50 years.

Diver training has evolved but BSAC philosophy has always been to produce highly competent self-reliant divers with excellent knowledge and practical skills and with safety considerations uppermost.

And BSAC doesn’t stop at diver training. BSAC has a rounded curriculum encompassing all activities of diving and seamanship, such as boat handling, chart work and navigation, oxygen administration, engine maintenance, compressor operation, technical diving and more. The breadth and scope of BSAC Training is unrivaled.

If you want to be the best, you’ll want to be with BSAC.
Course Overview

The requirement for attending the BSAC Instructor crossover course is that you are an Instructor from any agency other than BSAC and working in a centre where BSAC courses are to be offered.  Knowledge of other diving agencies and how they work is useful as it will give you a greater understanding of how elements fit in across the different agencies.

It must be emphasized that the crossover course Instructor examiner, is not there to assess your instructing ability but rather to acquaint you with BSAC methodology and knowledge so that you will have the tools to be able to deliver BSAC diving courses; mainly Ocean Diver, Sports Diver and Dive Leader.

The course duration is 2-days and covers the following elements

6 Theory lessons
2 Practical lessons

The course starts with a series of orientation lessons which introduces the Instructor to, the BSAC and how it operates, Diver grades, BSAC dive tables, BSAC teaching methodology etc.

In the latter, there will be a series of theory classroom lessons. In these lessons, the Course Instructor will demonstrate a typical classroom presentation; showing you how to breakdown the lesson contents into small manageable steps; making complex topics simple to understand. You  then will have a chance to present a 15 -20 minute classroom presentation using the prescribed method
Practical Sessions

The first practical session will be run by the course instructor, who will demonstrate a set of skills and how to progressively break them down.  You may not have seen some of these skills as they may not be in your agency’s training programme.

The second practical session, which will normally take place on day 2, is for you to have a go at a mini-teach of a skill you have seen previously.  It is not uncommon for some of the ‘students’ to have not been in the water for a while and so it is a good refresher and ‘hands-on’ approach.

Typical skills which will be demonstrated in ‘Sheltered Water’ include:

1    Control Buoyant Lift (CBL - some dive agencies do this skill completely differently so a good skill to learn)
2    AS (Alternative Source) using different applications
3    DSMB Deployment (Not taught in other dive agencies)
4    Distance Line Laying    (relocating the shot line)

There will be an emphasis on breakdown of skill, close proximity; double demos where necessary, surface control using SMB.

At the end of Day 1 you will be asked to plan and prepare 2 lessons to give on Day 2 as a confirmation of the course.  The lessons will be short; about 10 minutes.

The types of lesson are outlined below and all will have been taught or demonstrated on Day 1 by the Course Instructor.

1.    CBL (Covered in Ocean Diver training)
2.    PADI CBL (Good for everyone to see a different way of doing it)
3.    DSMB Deployment (Covered in Sports Diver training)
4.    Line Laying (Covered in Sports Diver training)
5.    AS (Covered in Ocean Diver Training)
6.    Rescue Breathing
Materials

Each student will receive their own comprehensive course support pack which will include,

• The Diving Instructor Manual
• Course Instructor Manual CD Rom
• A set of BSAC Nitrox and Air Decompression tables
• Qualification Card
• 1 year Instructor fee
• A set of Ocean Diver - lesson prompt cards
Course Entry Level

All candidates must produce proof of their instructor qualification from one of the following diving agencies

• CMAS
• PADI
• NAUI
• SSI
2009 Promotion

On all 2009 Instructor crossover courses candidates will also receive training and instructor qualifications in two of the BSAC Skill Development Courses. These courses are

• BSAC Oxygen Administrator
• BSAC Nitrox Instructor


How Deep is Too Deep?

Friday, September 25th, 2009

0005 How Deep is Too Deep?

During diver training, dive students are normally drilled to avoid diving beyond 130 feet / 39 meters. However this depth limit recommended by most of the training agencies is not forged in stone. Historically, it appears that it probably emerged from the U.S. Navy, possibly as a result of equipment limitations at that time, and the work restrictions imposed by the relatively short no-stop times available at greater depths.

An increasing number of divers dive beyond the 130-foot limit, some routinely and others occasionally. The advent of dive computers has negated much of the decompression penalty and dive restrictions previously associated with deep diving, and has no doubt encouraged the current trend. In addition, the increased availability of a variety of gas mixtures has enabled more divers to venture deeper and deeper.

Deep diving demands vast amounts of knowledge, experience and discipline, as well as appropriate preparation and equipment, since deep diving is fraught with potential hazards.

An old friend of mine used to teach diving at a tropical resort. The instructors routinely dived on air to depths approaching 300 ft (90m) and beyond on their days off. During such a dive, one instructor became unconscious at about 200 ft (60m) without obvious warning. He fell away and out of reach of the others before anyone could get it together to do anything. His body was never recovered.

Elsewhere, another diver diving at just over 165 ft (50m) on air on a wreck was seen to become unconscious and to convulse. Luckily his buddies managed to rescue and resuscitate him.

These are not isolated stories, and there are many similar reports involving deep air dives and mixed gas dives.

Unconsciousness underwater is often associated with deep diving accident reports. It usually results in drowning. A number of conditions can cause a diver to lose consciousness underwater.

All of which are exacerbated by depth. Blackout underwater may not be due to a single cause, but may result from a combination of physiological or physical factors.

Nitrogen narcosis can become a very serious adversary on deep air dives. Although we can acclimatize ourselves to the affects of narcosis to some extent by regular exposure to depth, it can still sneak up and very quickly overcome us when we don’t expect it. Although conventional wisdom states that the narcosis appears on arrival at a particular depth and usually does not worsen with continued exposure at that particular depth, many divers are aware that it can quickly be precipitated by exertion or stress at depth, without further descent.

Divers who have had to quickly deal with a problem at 200 ft (60m) on air realize the extreme difficulty of reacting rapidly and appropriately. Sometimes the mind-numbing effects of narcosis can strike suddenly and make appropriate reactions almost impossible. Extremely high levels of stress can be precipitated instantaneously and, unless controlled, panic and injury are likely results. Narcosis may be the direct cause of unconsciousness in a diver at depths somewhere in excess of 200 ft. Narcosis can be reduced by using certain gas mixtures. However, this involves the appropriate equipment, preparation, training and care since new potential hazards are introduced.

Carbon dioxide acts as a respiratory stimulant and can cause depression of the central nervous system (CNS). The effect depends on the level of carbon dioxide in the blood.

Hypercapnia increases narcosis and the likelihood of CNS oxygen toxicity. In addition, it may increase heat loss, alter heart rhythm and predispose to decompression illness. If the carbon dioxide level gets too high, and it can on deep scuba dives — especially if a diver is very anxious and / or exerting him/herself — the diver may go unconscious without warning. Certain divers are more susceptible to severe hypercapnia for a variety of reasons and are therefore more at risk.

When divers breathe oxygen at partial pressures greater than about 1.5 atmospheres (ata), it may rapidly exert a toxic effect on the brain. A diver breathing air at a depth of around 200 ft is exposed to an oxygen partial pressure of 1.5 ata. CNS toxicity is a limiting factor and a very real danger in deep diving since it can cause a diver to convulse and/or become unconscious with little or no warning. The likelihood of CNS oxygen toxicity increases with exposure time, cold, exertion and hypercapnia, and the depth and time of onset can vary greatly between individuals and from dive to dive.

The high nitrogen load accumulated by the “fast” and “medium” body tissues during a deep air dive can cause substantial bubble formation during or after ascent unless the decompression is properly controlled and conducted. Some of these bubbles may form in or enter the arterial circulation and cause neurological problems. This mechanism may be responsible for some underwater blackouts during ascents from deep dives.

Various data indicate that deeper diving is associated with a substantially increased risk of decompression illness. This risk appears to increase at depths beyond about 80 ft (24m). In addition, using a dive computer to guide decompression from deep air dives appears to increase the risk further due to the greater dive times allowed and the increased unreliability of the algorithms at depth. More and more divers have adopted the use of various gas mixtures in the belief that it will reduce the risk of decompression illness. However, recompression centers still treat a significant number of these divers.

Certain studies suggest that microbubbles are often present after dives, particularly deep dives, especially if ascent has not been appropriately executed but even after what is generally considered to be a safe ascent. Some hyperbaric specialists fear that microbubbles, although asymptomatic, may cause cumulative neurological damage in divers. However, to date, the evidence does not appear to be consistent.

Unless adequately prepared for, deep diving carries a higher likelihood of an air supply emergency. Increased ambient pressure means increased air consumption. In addition, narcosis may hinder a diver’s ability to properly monitor and manage the air supply. Despite the improvements and superior performance of much of the modern diving equipment, malfunctions do occur. The deep divers who value their hides ensure that they have adequate backups of various essential pieces of equipment, including an independent and adequate air supply.

Buoyancy compensation can sometimes become a critical factor on deep dives, especially in cold water where greater insulation is required. Unless compression of the exposure suit is adequately compensated for by BC or dry suit inflation, a diver may become very negatively buoyant at depth.

Wreck divers may sometimes prefer to be negatively buoyant, but problems can develop if the air supply is low and the diver needs to ascend fairly quickly.

Various experiments have demonstrated that, at low cylinder pressures, it is sometimes impossible to inflate a BC (or dry suit) at depths approaching 130 ft, especially while breathing simultaneously from the regulator. This problem would be magnified at greater depths. At times, a negatively buoyant diver who is low on air may find it difficult, or even impossible, to ascend without ditching their weight belt. If the weight belt is ditched, it is unlikely the diver will make it to the decompression line to get some extra air and perform any necessary stops.

Some divers routinely dive to depths in excess of 165 feet/50 meters on air, although over recent years gas mixtures such as heliox and trimix have become far more commonly used for very deep diving as they are less narcotic. These divers are often, but not always, conversant with the substantial risks and demands of these dives and choose to push the limits for their own reasons. Such divers are usually well equipped and well prepared for the dives. Most usually manage to get away with diving to these depths with no apparent problems, others do not. Some of the unfortunate ones are left with permanent disability; others die.

On the other hand, there is the “occasional” deep diver. These divers are generally less experienced than regular deep divers, are on a dive trip with a group, and are drawn into diving deeper than they normally do because of the more relaxed holiday atmosphere and because “everyone’s doing it.” Such divers are often not sufficiently trained, mentally prepared and appropriately equipped to deal with a problem should it occur on a deep dive.

It becomes obvious that there is no safe depth limit that applies to all divers all of the time. A diver’s ability to cope with depth depends on a number of highly variable factors. The depth of the onset of the effects of the exotic cocktail of elevated pressures of nitrogen, carbon dioxide and oxygen, coupled with the sensory deprivation and stress associated with diving, are not always predictable. A dive to 80 feet in cold, dirty water can be far more hazardous than a dive to twice the depth in warm, clear waters. Factors such as visibility, water temperature and diver experience and preparedness greatly affect a diver’s comfort and safety, rather than depth alone.

Divers in remote locations must also be aware of the complications associated with medical evacuation. These can include significant delays in retrieval due to lack of current availability of an aircraft and and/or medical team, the distances involved, as well as the accessibility of some airstrips in darkness or adverse weather conditions. Such delays can impact the amount and the effectiveness of the subsequent recompression treatment, and the likelihood of residual injury.

In addition, once a diver has been evacuated and/or treated for DCI, they will be advised to avoid air travel or driving to altitude for between three days and six weeks post treatment to avoid recurrence of symptoms. This can certainly impinge upon the diver’s travel and work commitments.

As with many things in life, one must balance the risks against the benefits and make a decision. However, it is essential to have a real understanding and appreciation of the risks.


What is Technical Diving?

Thursday, September 24th, 2009

Tech Diver

Technical diving (sometimes referred to as Tec diving) is a form of scuba diving that exceeds the scope of recreational diving (although the vast majority of technical divers dive for recreation and nothing else). Technical divers require advanced training, extensive experience, specialized equipment and often breathe breathing gases other than air or standard nitrox.

The concept and term ‘technical diving’ are both relatively recent advents,[note 1] although divers have been engaging in what is now commonly referred to as technical diving for decades. The term “technical diving” was first coined by Michael Menduno, editor of (now defunct) diving magazine AquaCorps in 1991.
Definition of ‘technical diving’

There is some level of professional disagreement as to what the term should encompass. It was not that many years ago that NITROX diving was considered “technical”; however today NITROX is not normally considered technical. Some say that technical diving is any type of SCUBA that is considered higher risk than conventional recreational diving. However, some advocate that this should include penetration diving (as opposed to open-water diving), whereas others contend that pentrating overhead environments should be regarded as a separate type of diving. Others seek to define technical diving solely by reference to the use of decompression. Certain minority views contend that certain non-specific higher risk factors should cause diving to be classed as technical diving. Even those who agree on the broad definitions of technical diving may disagree on the precise boundaries between technical and recreational diving.

PADI, the largest recreational diver training agency in North America, defines technical diving as “diving other than conventional commercial or recreational diving that takes divers beyond recreational diving limits. It is further defined as an activity that includes one or more of the following: diving beyond 40 meters/130 feet, required stage decompression, diving in an overhead environment beyond 130 linear feet from the surface, accelerated stage decompression and/or the use of multiple gas mixtures in a single dive.”

NOAA defines technical diving in this way: “Technical diving is a term used to describe all diving methods that exceed the limits imposed on depth and/or immersion time for recreational scuba diving. Technical diving often involves the use of special gas mixtures (other than compressed air) for breathing. The type of gas mixture used is determined either by the maximum depth planned for the dive, or by the length of time that the diver intends to spend underwater. While the recommended maximum depth for conventional scuba diving is 130 ft, technical divers may work in the range of 170 ft to 350 ft, sometimes even deeper. Technical diving almost always requires one or more mandatory decompression “stops” upon ascent, during which the diver may change breathing gas mixes at least once.” NOAA does not address issues relating to overhead environments in its definition.

The following table tries to set out the broad indicative parameters of what is normally regarded as technical rather than recreational diving.

Technical dives may be defined as being either dives to depths deeper than 130 feet / 40 meters or dives in an overhead environment with no direct access to the surface or natural light. Such environments may include fresh and saltwater caves and the interior of shipwrecks. In many cases, technical dives also include planned decompression carried out over a number of stages during a controlled ascent to the surface at the end of the dive.

The depth-based definition is derived from the fact that breathing regular air while experiencing pressures causes a progressively increasing amount of impairment due to nitrogen narcosis that normally becomes serious at depths of 100 feet / 30 metres or greater. Increasing pressure at depth also increases the risk of oxygen toxicity based on the partial pressure of oxygen in the breathing mixture. For this reason technical diving often includes the use of breathing mixtures other than air.

These factors increase the level of risk and training required for technical diving far beyond that required for recreational diving. This is a fairly conservative definition of technical diving.

Inability to ascend directly

Technical dives may alternatively be defined as dives where the diver cannot safely ascend directly to the surface either due to a mandatory decompression stop or a physical ceiling. This form of diving implies a much larger reliance on redundant equipment and training since the diver must stay underwater until it is safe to ascend or the diver has left the overhead environment.

Decompression stops

A diver at the end of a long or deep dive may need to do decompression stops to avoid decompression sickness, also known as the “bends”. Metabolically inert gases in the diver’s breathing gas, such as nitrogen and helium, are absorbed into body tissues when breathed under high pressure during the deep phase of the dive. These dissolved gases must slowly be released from body tissues by pausing or “doing stops” at various depths during the ascent to the surface. In recent years most technical divers have greatly increased the depth of the first stops, so as to reduce the risk of bubble formation before the [more traditional] long shallow stops. Most technical divers breathe enriched oxygen breathing gas mixtures such as nitrox during the beginning and ending portion of the dive. To avoid nitrogen narcosis while at maximum depth it is common to use trimix which adds a percentage of helium replacing nitrogen to the diver’s breathing mixture. Pure oxygen is then used during shallow decompression stops to reduce the time needed by the diver to effectively rid themselves most of remaining excess inert gas in their body tissues and reducing the risk of “the bends.” Surface intervals are usually required to prevent the residual nitrogen from building up to dangerous levels on subsequent dives.

Physical ceiling

These types of overhead diving can prevent the diver surfacing directly:

* Cave diving - diving into a cave system.
* Deep diving - diving into greater depths.
* Ice diving - diving under ice.
* Wreck diving - diving inside a shipwreck.

Extremely Limited Visibility

Technical dives in waters where the diver’s vision is severely impeded by low-light conditions, caused by silt or depth, require an elevated level of aptitude because of the knowledge and skill required to operate in such an environment, and because visibility impairments are often caused by moving water currents. The combination of low visibility and swift current make these technical dives extremely risky to all but the most skilled and well-equipped divers.[citation needed]

Gas mixes

Technical dives may also be defined by the use of hypoxic breathing gas mixtures other than air such as trimix, heliox, and heliair. This definition is derived from the fact that breathing a mixture with the same oxygen concentration as is found in air (roughly 21%) at depths greater than 180 feet / 55 meters results in a very rapidly increasing risk of severe symptoms of oxygen toxicity. The first sign of oxygen toxicity is usually a convulsion without warning. This convulsion usually results in a fatal accident, as the regulator falls out and the victim drowns. Sometimes the victim may get warning symptoms prior to the convulsion. These can include visual and auditory hallucinations, nausea, twitching (especially in the face and hands), irritibility and mood swings and dizziness. Increasing pressure due to depth also causes nitrogen to become narcotic, resulting in a reduced ability to react or think clearly (see Nitrogen narcosis). By adding helium to the breathing mix, divers can reduce these effects, as helium does not have the same narcotic properties at depth. These gas mixes can also lower the level of oxygen in the mix to reduce the danger of oxygen toxicity. Once the oxygen is reduced below 18% the mix is known as a hypoxic mix as it doesn’t contain enough oxygen to be used safely at the surface.

Nitrox is another common gas mix, and while it is not used for deep diving, it decreases the build up of nitrogen within the diver’s body by increasing the percentage of oxygen. This reduces the nitrogen percentage, as well as allowing for a greater number of multiple dives vs “standard” air. The depth limit of Nitrox is governed by the percentage of oxygen used, as there are multiple oxygen percentages available in nitrox. Further training and knowledge is required in order to safely use and understand the effects of these gases on the body in a diving situation.

“Deep air”/extended range diving

One of more divisive subjects in technical diving relates to using compressed air as a breathing gas on dives below 130 feet/40 meters. Whilst the largest technical diver training agencies still promote and teach such courses (TDI, IANTD and DSAT/PADI), there is an increasingly vocal minority (NAUI Tec, GUE, UTD) which argues that diving deeper on air is unacceptably risky, and argue that helium mixes should be used for dives beyond a certain limit (100 - 130 feet, depending upon agency). Such courses used to be referred to as “deep air” courses, but are now commonly called “extended range” courses.

Deep air proponents base the proper depth limit of air diving upon the risk of oxygen toxicity. Accordingly, they view the limit as being the depth at which partial pressure of oxygen reaches 1.4 ATA (which occurs at about 186 feet/50 metres). Helitrox/triox proponents argue that the defining risk should be nitrogen narcosis, and suggest that when the partial pressure of nitrogen reaches approximately 4.0 ATA (which occurs at about 125 feet/38 meters) helium is necessary to offset the effects of the narcosis.

DAN does not formally reject deep air diving per se, but it is keen to point out a number of additional risks which such diving involves.

Equipment

Technical divers may also use various forms of less common diving equipment to accomplish their goals. Typically technical dives involve significantly longer durations than average recreational scuba dives. As decompression stops act as a virtual overhead, preventing a diver with a problem from surfacing immediately, there is a need for redundant equipment. Technical divers usually carry at least two tanks, each with its own regulator. In the event of a failure, the second tank and regulator acts as a back-up system. Technical divers therefore increase their supply of available breathing gas by either connecting multiple high capacity diving cylinders and/or by using a rebreather. The technical diver may also carry additional cylinders, known as stage bottles, to ensure adequate breathing gas supply for decompression with a reserve for bail-out in case of failure of their primary breathing gas. The stage cylinders are normally carried using an adaptation of a sidemount configuration.

Training

Technical diving requires specialised equipment and training. There are many technical training organisations: see the Technical Diving section of List of diver training organizations. Technical Diving International (TDI), Global Underwater Explorers (GUE), International Association of Nitrox and Technical Divers (IANTD) and National Association of Underwater Instructors (NAUI) seem to be popular as of 2009. Recent entries into the market include Unified Team Diving (UTD), and Diving Science and Technology (DSAT), the technical arm of Professional Association of Diving Instructors (PADI). The Scuba Schools International (SSI) Technical Diving Program (TechXR - Technical eXtended Range) was launched in 2005.

British Sub-Aqua Club (BSAC) training has always had a technical element to its higher qualifications, however it has recently begun to introduce more technical level Skill Development Courses into all its training schemes, by introducing technical awareness into its lowest level qualification of Ocean Diver, for example, nitrox will become mandatory. It has also recently introduced trimix qualifications and continues to develop closed circuit training.


Lonely in Thailand - Solo Diver Course - Koh Tao

Friday, September 4th, 2009

Solo Diving once considered technical diving and discouraged by certification agencies is now seen as an acceptable practice for those divers suitably trained and experienced. Rather than relying on the traditional buddy diving safety system solo divers are skilled in self sufficiency and are able to take responsibility for their own safety while diving. The first Training Agency to offer a Solo Diving certification was SDI (Scuba Diving International) in 1999. To date they remain the only agency to formalise this level of diver training. Additionally Big Blue Tech is the only school on the west coast to offer this course (including Bangkok, Koh Samui, Patatya and Koh Pang-Nga)

Other certifications have this style of course called either independent diver or self sufficient diver but nothing beats the label “Solo Diver

Big Blue Tech completed this course for Mark (dive master intern from Pattaya) Matt (Oil Industry worker from Pattaya) and Andy (Big Blue Tech Dive Master Intern). The course took 2 days with a morning of theory and 4 dives.

The skills learned on the course including aspects of dive planning, gas monitoring, redundant breathing sources, navigation and physical stamina. The students were pushed close to the edge of their comfort level with the introduction of new methods of diving.

The course is designed to train a diver to a level where he can dive on his own without supervision providing he/she has a backup breathing supply. Additionally their SAC rates were calculated so they could effectively determine their gas consumption prior to the dive.

One of their last two dives let them explore Chumphon Pinnacle (Koh Tao’s premier dive site) with the support of surface cover who had their dive plan logged.

Matt and Mark return to Pattaya today after a night on the town. Andy went straight back to working towards his technical divemaster course by assisting on an Advanced Nitrox Course.

Below are some pictures of their course.


Event - BSAC Instructor Crossover June

Tuesday, June 30th, 2009

bsac-technical-logo Event - BSAC Instructor Crossover June

Historically BSAC was based on a branch system. Unlike other diver certification agencies, BSAC members enter a local community of divers. This means BSAC members are more active divers, and have greater allegiance towards other BSAC Branches and Dive Centres.

There are large numbers of active BSAC Members in the UK, Middle East, Japan, Korea and Thailand. By becoming a BSAC professional you’ll have unrestricted access to market your training and trips to these tens of thousands of BSAC Members, through channels not available to non-BSAC schools.

BSAC Training is the choice of the UK Armed forces, plus universities in the UK and Thailand. By becoming a BSAC professional you’ll have access to large markets not available to non-BSAC schools.

Many hundreds of thousands of divers have trained with the BSAC over more than 50 years.

Diver training has evolved but BSAC philosophy has always been to produce highly competent self-reliant divers with excellent knowledge and practical skills and with safety considerations uppermost.

And BSAC doesn’t stop at diver training. BSAC has a rounded curriculum encompassing all activities of diving and seamanship, such as boat handling, chart work and navigation, oxygen administration, engine maintenance, compressor operation, technical diving and more. The breadth and scope of BSAC Training is unrivaled.

If you want to be the best, you’ll want to be with BSAC.

Course Overview

The requirement for attending the BSAC Instructor crossover course is that you are an Instructor from any agency other than BSAC and working in a centre where BSAC courses are to be offered.  Knowledge of other diving agencies and how they work is useful as it will give you a greater understanding of how elements fit in across the different agencies.

It must be emphasized that the crossover course Instructor examiner, is not there to assess your instructing ability but rather to acquaint you with BSAC methodology and knowledge so that you will have the tools to be able to deliver BSAC diving courses; mainly Ocean Diver, Sports Diver and Dive Leader.

The course duration is 2-days and covers the following elements

6 Theory lessons
2 Practical lessons

The course starts with a series of orientation lessons which introduces the Instructor to, the BSAC and how it operates, Diver grades, BSAC dive tables, BSAC teaching methodology etc.

In the latter, there will be a series of theory classroom lessons. In these lessons, the Course Instructor will demonstrate a typical classroom presentation; showing you how to breakdown the lesson contents into small manageable steps; making complex topics simple to understand. You  then will have a chance to present a 15 -20 minute classroom presentation using the prescribed method
Practical Sessions

The first practical session will be run by the course instructor, who will demonstrate a set of skills and how to progressively break them down.  You may not have seen some of these skills as they may not be in your agency’s training programme.

The second practical session, which will normally take place on day 2, is for you to have a go at a mini-teach of a skill you have seen previously.  It is not uncommon for some of the ‘students’ to have not been in the water for a while and so it is a good refresher and ‘hands-on’ approach.

Typical skills which will be demonstrated in ‘Sheltered Water’ include:

1    Control Buoyant Lift (CBL - some dive agencies do this skill completely differently so a good skill to learn)
2    AS (Alternative Source) using different applications
3    DSMB Deployment (Not taught in other dive agencies)
4    Distance Line Laying    (relocating the shot line)

There will be an emphasis on breakdown of skill, close proximity; double demos where necessary, surface control using SMB.

At the end of Day 1 you will be asked to plan and prepare 2 lessons to give on Day 2 as a confirmation of the course.  The lessons will be short; about 10 minutes.

The types of lesson are outlined below and all will have been taught or demonstrated on Day 1 by the Course Instructor.

1.    CBL (Covered in Ocean Diver training)
2.    PADI CBL (Good for everyone to see a different way of doing it)
3.    DSMB Deployment (Covered in Sports Diver training)
4.    Line Laying (Covered in Sports Diver training)
5.    AS (Covered in Ocean Diver Training)
6.    Rescue Breathing
Materials

Each student will receive their own comprehensive course support pack which will include,

• The Diving Instructor Manual
• Course Instructor Manual CD Rom
• A set of BSAC Nitrox and Air Decompression tables
• Qualification Card
• 1 year Instructor fee
• A set of Ocean Diver - lesson prompt cards
Course Entry Level

All candidates must produce proof of their instructor qualification from one of the following diving agencies

• CMAS
• PADI
• NAUI
• SSI
2009 Promotion

On all 2009 Instructor crossover courses candidates will also receive training and instructor qualifications in two of the BSAC Skill Development Courses. These courses are

• BSAC Oxygen Administrator
• BSAC Nitrox Instructor


 


Top of Page

Valid XHTML 1.0 Transitional Valid CSS!